660nm SMD 2835 LED for plant growth lamp

Type: SMD LED
Emitting Color: Deep Red
Luminous Intensity: 2-3lm
Luminous Flux(lm): 2~3lm
Power: 0.2w
Viewing Angle(°): 120 Degree
Wavelength: 660nm
Operating Temperature(℃): -40 - 85

Product:660nm SMD 2835 LED for plant growth lamp

Led plant growth lamp is a kind of plant lamp.According to the growth rule of the plant, it must need sunshine, plant growth lamp is the principle that USES sunshine, replace sunshine, give a kind of lamp of environment of plant growth development.Controlling plant morphogenesis by light quality control is an important technique in facility cultivation.Ideal for all stages of plant growth, working well with indoor gardens, aqueous or soil grown plants

Features:
1.high brightness, low energy consumption
2.Good raw materials used
3.Super luminous efficiency
4.long lifespan,High stability
5. Environmental protection: no toxic metal mercury, no infrared and ultraviolet radiation

Specification:
Type: SMD LED
Emitting Color: Deep Red
Luminous Intensity: 2-3lm
Luminous Flux(lm): 2~3lm
Power: 0.2w
Viewing Angle(°): 120 Degree
Wavelength: 660nm
Operating Temperature(℃): -40 - 85
Storage Temperature(℃): -40 - 85
Voltage: 3.0~3.4V
Current: 60mA
WLD: 650~660nm
Package: Anti-static vacuum Bag
Lifespan: 30000-50000 Hours
Warranty: 1-3 Years

Application:
It is suitable for indoor garden, potted plant, garden, seeding, breeding, farm, spraying planting, greenhouse culture, water culture, flower culture, greenhouse culture, pipe culture and so on.

Precautions for use
storage
(1) before opening the package
The temperature does not exceed 40 ℃ and humidity no more than 90% under the condition of RH, LED can be saved for a year, at the time of storage, recommended the moisture bag with desiccant packaging.
(2) after opening the package
LED to stored in 40 ℃ & < < = = 60% RH relative humidity conditions, we strongly recommend that you open the packaging to finish SMT within a week to finish the whole process.
If there is any left LED which is not used up, we suggest to use the factory moisture-proof agent again and re-seal it.
If desiccant has expired, please put the LED in the 70 ℃ oven for 12 hours.
The LED electrode and lead frame are made of copper alloy coated with silver. The silvered layer will be damaged by the surrounding environment. Please keep the LED away from the environment that will corrode the silvered layer of the LED electrode.
Please avoid LED in the environment of rapid temperature change, especially in the high humidity environment where condensation will occur.
anti-static
Static electricity and surge voltage will damage the LED, it is recommended to wear anti-static ring and anti-static gloves when touching the LED.
All equipment, devices and machines must be grounded. It is recommended that appropriate measures be taken to prevent the surge voltage breakdown of LED.
 

Tips on getting accurate quotes from suppliers. Please include the following in your inquiry:
1. Personal or business information
2. Provide product request in great detail
3. Inquiry for MOQ, Unit Price, etc



Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.

Contact Supplier

Inquire Now